Option 1 - Gvis300C; Option 2 -Gvis300C-Pm-02-V; Option 3 - Gvis300C-Pm-04-V - Greenlee Communications GVIS300C Guia Del Usuario

Model Options
The GVIS300C is available in three hardware
configurations. Each configuration has benefits
for different testing situations. Users should
evaluate how they will be using the GVIS300C
when deciding on a model. Each model is
listed below along with a brief list of included
accessories and common use cases for the
hardware.
Option 1 - GVIS300C
The base model is an inspection-only device. This
model is ideal for users who need
a field-viewing device for fiber connectors or
who need to inspect, grade, and save many fiber
connector images very quickly.
Hardware: HD probe with analysis button, 5-inch
touchscreen monitor with onboard storage and
report creation software. Monitor is housed in
protective sheath case.
Accessories Included: 1.25mm and 2.5mm universal
inspection tips, LC and SC bulkhead tips.
Option 2 -GVIS300C-PM-02-V
The GVIS300C-PM-02-V is an all-in-one test and
inspection system. An onboard optical power meter
(OPM) and visual fault locator (VFL) bring extra
functionality to the device. The Germanium detector
in the power meter on this model makes it ideal for
most users who need to test dB loss on single mode
and multimode fiber at test sites, such as on cell
towers and in central office settings. The red laser
in the VFL provides fault detection and continuity
testing on fiber runs up to 5km.
Hardware: HD probe with analysis button, 5-inch
touchscreen monitor with onboard storage and
report creation software. Built-in power meter with
Germanium detector (+6 to -60 dBm range) and
635nm red laser VFL. Monitor is housed in protective
sheath case.
Accessories Included: 1.25mm and 2.5mm universal
inspection tips, LC and SC bulkhead tips. 2.5mm
universal adapter for power meter port. 2.5mm
universal adapter for VFL output port.
Option 3 - GVIS300C-PM-04-V
The GVIS300C-PM-04-V is an all-in-one test and
inspection system. An onboard optical power meter
(OPM) and visual fault locator (VFL) bring extra
functionality to the device. The Filtered InGaAs
detector in the power meter on this model makes it
ideal for users who need to test the output of high-
powered transmit equipment at remote sites, such
as at the ONT or OLT for FTTH applications. The
red laser in the VFL provides fault detection and
continuity testing on fiber runs up to 5km.
Hardware: HD probe with analysis button, 5-inch
touchscreen monitor with onboard storage and
report creation software. Built-in power meter with
Filtered InGaAs detector (+23 to -45dBm range) and
635nm red laser VFL. Monitor is housed in protective
sheath case.
Accessories Included: 1.25mm and 2.5mm universal
inspection tips, LC and SC bulkhead tips. 2.5mm
universal adapter for power meter port. 2.5mm
universal adapter for VFL output port.
www.GreenleeCommunications.com
3