Device Settings; Reset Defaults - Greenlee Communications GVIS300C Guia Del Usuario

User Guide
(cont'd)
Device Settings
Control screen brightness, set auto-shutdown parameters, and reset default settings on the GVIS300C
2
4
1
Control Screen Brightness
Screen brightness is controlled via the on-screen slider. Note that using brighter screen settings may
slightly affect battery life.
2
Set Screen Timeout
The GVIS300C is set to never timeout by default. Setting the screen to timeout after 10 minutes will
ensure that the GVIS300C battery does not drain if the device is left on accidentally. The 10-minute
timer will reset each time a button is pressed on-screen. If no on-screen buttons are pressed after ten
minutes, the GVIS300C will shut down.
3
Connected Accounts
This section shows any email or Google accounts which have been setup on the GVIS300C device
4
Reset Defaults
Touching "Reset to Defaults" brings up a dialog box with two options: Restore and Reset. Touching
"Reset" will simply remove any email/cloud accounts associated with the GVIS300C. Touching
"Restore" will completely wipe all data from the GVIS300C, including all projects and data. Only touch
"Restore" if you are sure there is no important data saved to the GVIS300C.
16
www.GreenleeCommunications.com
1
3