1.2 General safety
Check if the appliance gets any damage after
unpacking it. Do not connect the appliance if it has
been damaged. Only a licensed professional may install
this appliance and replace the cable.
The electrical plug must remain accessible after
installation.
Damages caused by incorrect connection is not
covered under warranty.
Before carrying out any maintenance, disconnect the
appliance from the power supply.
The appliance can be disconnected by using an
accessible power outlet or by incorporating a switch in
the fixed lines, in accordance with installation rules.
If the main power supply cable is damaged, it must be
replaced by the manufacturer, its authorized service
center or similar qualified persons to avoid an electrical
hazard.
Ensure that the power cables of any electrical
appliances plugged in close to the hob are not in
contact with the cooking zones.
Metallic objects such as knives, forks, spoons and lids
should not be placed on the hob surface as they can
get hot.
Never use steam or high-pressure tools to clean your
appliance.
The appliance is not designed to be switched on using
an external timer or a separate remote-control system.
WARNING: leaving oil or fat to cook unattended on a
2