Problem
Water leaks at the
water supply hose
connector.
There are loud noises
and vibrations when
spinning.
Untitled-2 35
Checkpoints
If the water supply hose
connector at the tap is loose,
water can leak.
Check if the rubber ring in the
water supply hose connector is in
the right position.
Check if the water supply hose is
twisted.
If the water supply is too strong,
water may leak.
Check if water is leaking from the
tap itself.
Check if the laundry is spread out
evenly in the washer.
Check if the washer is balanced
and on a sturdy, flat surface.
Ensure that the washer is not
surrounded by unnecessary
items.
English - 35
Action
Repeat the assembling steps.
(Refer to "Step 3 - Connect the
water supply hoses" on page 13)
Move it into the correct position.
Straighten the hose.
Adjust the tap so less water flows
into the supply hose.
Fix the tap.
Spread out the laundry evenly and
start again.
Ensure that the washer is leveled.
Move anything unnecessary away
from the washer.
2014-05-26
10:51:15