Velleman CCTVPROM9 Guía Rápida página 7

live audio channel enabled
audio channel disabled
digital zoom on (yellow) / off
USB flash drive connected
key lock on
sequence mode
recording mode
administrator logged on
Note that actual screen icons might differ slightly from the ones shown above.
Quick menu bar
Note: only available when USB mouse is connected.
• Move the pointer towards the left of the monitor to open the quick menu bar.
Recording
•
Check whether the camera(s) is (are) properly connected and a HDD is present inside the device.
•
When the auto-recording and pre-alarm functions are enabled, the device will start recording images.
•
Default the recording icon (
•
In case the motion or alarm detection is activated and a motion or alarm is detected, the motion (
alarm ( ) icon is shown.
•
When timed recording is enabled, the timed recording icon (
on.
•
Default, the device is in HDD overwrite mode and the icon (
Play-back
•
Make sure the control panel is not locked and press the PLAY button on the control panel or use the quick
menu bar to open the playback control panel.
Note: play-back needs at least 8192 recorded images to work properly (e.g. with IPS=30, the recording must
be at least 273 seconds long).
•
The fast forward (FF) and fast rewind (REW) buttons will increase resp. decrease the play-back speed.
Repeatedly pressing the button will increase/decrease speed to 4x, 8x 16x or 32x (max.).
•
Press the PAUSE button to temporary suspend video play-back.
•
Press the STOP button to return to live monitoring.
•
Press the SLOW button once to set play-back speed to 1/4
Search
•
There are four ways to search recorded files: by record list, motion list, alarm list or by timer list.
•
To search an event, press the LIST button on the front panel (make sure the control panel is not locked). An
overview of the recorded file types (ALARM, MANUAL, MOTION, SYSTEM and FULL LIST) is shown.
23/11/2010
CCTVPROM9
LAN connected / Internet connected / no network connection
) is shown.
A system date and time
B general system status
C available HDD capacity
playback audio channel enabled (yellow)
timer recording
USB mouse connected
Hard disk overwrite (default)
PTZ mode
motion mode
alarm mode
operator logged on
) is showed and the timed recording LED is
) is shown.
th
and twice for 1/8
7
th
.
©Velleman nv
) resp.