General Safety And Accident Prevention Regulations; Proper Use; Technical Data - ALPHA-TOOLS US 800/1 E Manual De Instrucciones

Anleitung US 800-1 E_SPK7:_
GB
1. Layout
1 ON/OFF switch
2 Locking button
3 Selector wheel for blade speed pre-selection
4 Saw blade fastening screw
5 Saw blade for wood
6 Saw blade for metal
7 Soleplate
8 Allen key
2. General safety and accident
prevention regulations
The corresponding safety information can be
found in the enclosed booklet.

3. Proper use

The multi-saw is designed for sawing wood, iron,
non-ferrous metals and plastic. It should only be
used with the appropriate saw blade.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
4. Starting up (Fig. 1)
To switch on: Press the interlock button 2 and the
switch 1 simultaneously.
To switch off: Release the interlock button and the
switch.
5. Electronic stroke rate control
The required blade speed can be selected using the
selector wheel (7).
The general rules for cutting speeds for cutting work
apply.
6
13.10.2006 9:01 Uhr Seite 6
6. Changing the saw blade (Fig. 2/3)
Always switch off and unplug the multi-saw before
working on the machine or changing the saw blade.
Unscrew the screw (4) on the ram using the Allen
key (8) included in delivery. Slide the saw blade into
the ram between the lifting rod and retention bar (9)
and make sure that the bolt on the ram engages in
the drilled hole on the saw blade. Then tighten the
screw with the Allen key (8) included in delivery. The
teeth on the saw blade must be pointing in the
direction of cutting.
7. Use as a jigsaw (Fig. 4)
Place the multi-saw on the material to be cut as
shown in Fig. 4. Switch on the multi-saw and push it
along against the material to be cut. Adapt your
cutting speed to the material.

8. Technical data

Rated voltage: 230 V ~ 50 Hz
Power:
Stroke rate: 0-2400 min
Stroke height:
Cutting depth in wood:
Cutting depth in iron:
Sound pressure level L :
pA
Sound power level L : 103,2 dB (A)
WA
Vibration a
w
Totally insulated
Weight
800 W
-1
28 mm
150 mm
6 mm
90,2 dB (A)
10,7 m/s 2
II /
3,8 Kg