Idiomas disponibles
Idiomas disponibles
a holding down the power/lnterphone key on the headset, until
the red & blue LED flash alternately.
3)Begin the "searching for Bluetooth device"on the cell phone
according to the phone's instructions
4)when the BIM is discovered, the cell phone will display Motor
Phone select this and accept the connection
5)The cell phone will ask you to input a pssword to enable this
connection, when prompted input password:0000(four zeros)
6)Your phone will confirm that pairing has succeeded. Note that
the only light showing on the headset is now the blue one and it
will flash once every 5 seconds
Basic B.I.M Operation
1) Turn on
Press the power/lnterphone key for 6 seconds or so, until the blue lamp
illuminate, promptly release the press power/lnterphone key, then the
blue LED will flash every 5 seconds.
2) Turn off
Press the power/lnterphone key for 6 seconds until the blue lamp long
illuminate, promptly release the power/lnterphone key then the blue led
will extinguish.
3) Increase the volume
Short press of the V+key
4) Reduce the volume
Short press of the V-key
5) Connect the cell phone for some reason(e.g.ln some regions of high
RF strength),may the BIM will lose connection with the cell phone, a
short press on the phone/play key, they will connect each other.
Safety Cell phone calls function
1)Receive a cell phone call automatically
When income a cell phone calls, you will hear the ring on the cell
phone and about 3-5 seconds later, the BIM will receive the call
automatically.
2)Terminate cell phone call
When you finish talking on the cell phone, a short press the
Phone/Play Key, will terminate the call.
3)Reject a cell phone call
When income a cell phone call, you will hear the ring, immediately
press the Phone/Play key within2-3seconds,it will reject the call.
4)Make a cell phone call Dial a number on your phone as normal,
english
17
