Idiomas disponibles
Idiomas disponibles
The speaker with short wire cord ear.
Adjust the position of the microphone.
Note: To reduce the external noise, you need to close the visor
while riding, and please adjust the position of the microphone to
be right in front of your mouth with the foam just touching your
lips; the visor should cover the microphone effectively! (Minimizes
wind noise contribution)
3)Plug in the positioned headset to the communications module
and attach it to the side of the helmet.
4.Operation:
pairing with your Bluetooth phone for the first time
Note: You must have a Bluetooth enabled phone to "pair"with the
BIM The rider and pillion pairing their headsets with their
respective mobile phone should be at different time,
Before using the BIM, please familiarize yourself with Bluetooth
function of your cell phone.Read the instruction manual that came
with the phone so you can enable its Bluetooth function.
Before you can use this BIM in combination with your phone, you
will need to"pair"it with your cell phone for the first time. This.
usually only needs to be performed once with that individual
phone however follow the instructions supplied by the phone
manufacturer and save the "pairing"so it will be automatically
connected when this phone and the BIM come into contact again.
1)Enable the Bluetooth function on your cell phone.
2)You must place the BIM in "pairing mode",this is done by way of
16
english
