Warning; Instalation - Diamond MCX/7-PH Manual De Usuario

Read the instructions carefully before using the machine and keep them for future references. The
manufacturer declines all responsibilities if the standards of the manual are not respected.
The present machine is a cutlery dryer and polisher.
This machine should be only used for the purpose for which it has been designed. Any other use is
inappropriate and therefore dangerous. The manufacturer will not be responsible for any damage
caused by inappropriate use.
Before installing and using the machine read carefully this instruction manual.
The manufacturer will be able to introduce technical or aesthetic changes without previous notice.
Improper installation may damage the dryer machine. Please note the following during initial installation
and whenever the dryer machine is moved.
1.- UNPACKING
- Cut the external strips, take out the carboard container, pullig up from it and retire the external
polistyrene.
- Take the machine down from the pallet. This pallet is using for transporting the machine.
INSPECT THE MACHINE FOR POSSIBLE DAMAGES IN THE TRANSPORT OR UNDUE HANDLIG. If it was
necessary present a reclamation before 24 hours to the transport company.
Open the upper cover and take away the wooden piece from the interior, and the polystyrene and
cardboard pieces that are in the lateral sides of the deposit.
Once carried out these operations, retire the three black screws from the upper deposit and extract the
sawdust bag placed inside it. Place again these three black screws holding the superior transparent
piece. ( FIG. 0)
FIG. 0

5. WARNING

6. INSTALLATION
EN
20