Diamond MCX/7-PH Manual De Usuario página 30

NEVER BRING THE HANDS NEAR OR MANIPULATE THE GERMICIDAL LAMP AND THE HOT AIR
TURBINE AREAS WHEN THE DRYER IS WORKING.
PROTECT YOUSELF AGAINST ELECTRICAL SHOCKS. Avoid the contact of the machine with electric
conduction materials.The machine should always have an isolation protection when being in contact
with other materials.
THE REGULATION, CONSERVATION, REPAIR AND CLEANNING OPERATIONS OF THE MACHINE ARE
CARRIED OUT WITH THE MACHINE STOPPED AND DISCONNECTED FROM THE NET. If you haven't been
using the machine and before proceeding to the maintenance or the substitution of a piece disconnect
it from the net.
CONNECTION CABLE FOR EXTERNAL. Only use marked confirmed and meetly jumper leads.
THE REPAIRS WILL ONLY BE CARRIED OUT BY AN SPECIALIST. This electric machine has been
manufactured executing the rules that official organisms demand. The repairs can only be carried out by
an specialist; otherwise accidents can happen.
CONTROL IF YOUR MACHINE HAS ANY DETERIORATION.
• All the components should complete CE requirements and approvals to guarantee the perfect
working of the machine.
• Any deteriorated piece, switch or feeding cable will be changed or repaired by a post-sale service
workshop, or by qualified staff to avoid any danger.
USE ONLY THE ACCESSORIES AND THE ADAPTIVE UNITS MENTIONED IN THE BRIEFINGS, OR ANY THAT
HAVE BEEN RECOMMENDED BY THE MANUFACTURER OF THE MACHINE. The use of other accessories,
except those recommended in the briefings, in the catalogue, or recommended by the manufacturer
can be dangerous. All the security elements should be substituted only by other equivalents,
homologated by the CE, and always be in perfect state.
AVOID ANY CONTAMINATION POLLUTION RISK CARRYING OUT AT LEAST TWO DAILY CLEANINGS;
CLEAN ALL THE PIECES AND INSIDE PARTS EFFICIENTLY WITH NEUTER SOAP.
USE ONLY THE ACCESSORIES AND THE ADAPTIVE UNITS MENTIONED IN THE BRIEFINGS, OR ANY THAT
HAVE BEEN RECOMMENDED BY THE MANUFACTURER OF THE MACHINE. The use of other accessories,
except those recommended in the briefings, in the catalogue, or recommended by the manufacturer
can be dangerous. All the security elements should be substituted only by other equivalents,
homologated by the CE, and always be in perfect state.
AVOID ANY CONTAMINATION POLLUTION RISK CARRYING OUT AT LEAST TWO DAILY CLEANINGS;
CLEAN ALL THE PIECES AND INSIDE PARTS EFFICIENTLY WITH NEUTER SOAP.
27
EN