Patient Setting Up - Kinetec CPM concept Manual De Empleo

Patient setting up

Make sure the straps are clean.
Put the unit in the position that is the most comfortable for the patient.
Adjustment of the shoulder axis
Press the key
Then press continuously the keys or
The abduction motor allows a shoulder positioning
between 60° to 90° of abduction.
This function will stop, if one of those two keys is
not pressed more than 3 seconds.
The knob (29) allows the adjustment of the
31
abduction plane, for best results; position on the
29
scapular plane.
30
The knobs (30) allow the height adjustment.
The knob (31) allows the shoulder wide
adjustment.
Adjustment of the lengths.
5
The knob (32) allows the length adjustment of
the arm.
The knob (7) allows the length adjustment of the
forearm.
8
The knob (8) allows the positioning of the
pronation-supination.
32
7
Position the arm support (5).
• Starting the unit:
- Adjust the movement parameters (see page 8). Then press the key
- or select a program (see page 11).
GB
15