Royal Sovereign RDH-300 SERIE Manual De Instrucciones página 7

7) Clean Filter- When the filter needs to be cleaned, the filter indicator will light up (after 250 hours of use). Remove the filter from the
back of the unit by using your thumbs to press down on the filter tabs directly above the filter. Clean the filter with warm, soapy water.
Dry thoroughly before replacing the filter. Once the filter is completely dry, place the filter back in the unit and press the FILTER button
to reset the filter indicator.
CAUTION: do not operate the dehumidifier without the filter
8) Pre-set Modes- Preset humidity level settings allow the user to easily move the dehumidifierroom-to-room and select the corresponding
mode for the location in which the dehumidifier is operating for optimum performance. Press the MODE button to choose from Sleeping Space,
LivingSpace or Base-ment.
9) Child-Lock Mode- To lock the control panel, press and hold the TIMER button for 3 seconds.Lock-ing the control panel prevents someone from accidentally
changing the settings. When locked, the LOCK Indicator will light up. Press and hold the TIMER button for 3 seconds to unlock the control panel.
10) Internal Pump Mode- The internal pump allows the unit to operate without having to empty the bucket and requires the installation of the included pump drain
hose kit. To install the kit, remove the drain cap on the back of the unit.Insert the included gasket into the front of the included pump adapter. Force the included
clear drain hose on to the pump adapter and turn adapter clockwise on to the garden hose type nozzle on the back of the unit. Once securely installed, lead the
drain hose to a nearby drain, sink or out a window. Turn on the dehumidifier and press the PUMP button to activate the internal pump. The" PUMP" LED indicator
should illuminate.
NOTE: Water can be pumped up to 16 ft. Make sure there are no kinks or knots in the hose.
NOTE: Do not clean filter in dishwasher
7
RDH-300 SERIES