Description Of Symbols - Silverline 946680 Traducción Del Manual Original

GB
Introduction
Thank you for purchasing this Silverline tool. This manual contains information
necessary for safe and effective operation of this product. This product has
unique features and, even if you are familiar with similar products, it is necessary
to read this manual carefully to ensure you fully understand the instructions.
Ensure all users of the tool read and fully understand this manual.

Description of Symbols

The rating plate on your tool may show symbols. These represent important information
about the product or instructions on its use.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
Wear head protection.
Wear hand protection.
Read instruction manual.
Caution!
Charger: Class II construction (double insulated for additional protection)
For indoors use only (battery charger and PSU)
DO NOT incinerate batteries!
T3.15A
Internal time-lag fuse with rated current 3.15A
Environmental Protection
Waste electrical products and batteries, including Li-Ion batteries, should not
be disposed of with household waste. Please recycle where facilities exist.
Check with your local authority or retailer for recycling advice.
Conforms to relevant legislation and safety standards.
4
Original Instructions
Technical Abbreviations Key
V Volts
~, AC
Alternating current
A, mA
Ampere, milli-Amp
Ah Amp hours (battery
capacity)
n0
No load speed
n Rated speed
Nm Newton metres
(torque)
°
Degrees
Ø Diameter
Hz Hertz
Specification
Drill:
Voltage: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18V
No load speed: . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0 – 400/min / 0 – 1450/min
Impact rate:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16,250/min
Chuck capacity:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.8-10mm (3/8")
Torque settings:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16+2
Max Torque:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20Nm
Dimensions (L x W x H):. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .205 x 78 x 215mm
Weight: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2kg
Drilling Capacities:
Mild steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ø8mm
Wood. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ø20mm
Masonry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ø13mm
Battery:
Cell type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Li-Ion
Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18V, DC
Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.3Ah
Charger PSU:
Input power. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100-240V~, 50/60Hz, 13W
Output power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22V, DC, 400mA
Cable length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.8m
Protection class. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Battery Charger:
Input power. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22V, DC
Battery charger type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Intelligent
Charging time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5hrs (1.3Ah)
As part of our ongoing product development, specifications of Silverline products
may alter without notice.
Sound and vibration information
Sound pressure L :. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90dB(A)
PA
Sound power L : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79dB(A)
WA
Uncertainty K: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3dB
Weighted vibration: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.339m/s
Uncertainty K: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5m/s
The sound intensity level for the operator may exceed 85dB(A)
and sound protection measures are necessary.
, DC Direct current
W, kW Watt, kilowatt
/min or min Operations per
-1
minute
rpm Revolutions per
minute
bpm
Blows (impacts) per
minute (drill)
dB(A) Decibel sound level
(A weighted)
m/s Metres per second
2
squared (vibration
magnitude)
2
2