COOL HEAD CW 90 Manual De Instrucciones página 9

Operation
Temperature Setting and Control (90L Single temperature)

The front panel of the thermostat display:

The wine cellar is preset from the factory to automatically accommodate temperature
requirements for red or white wines.
If you store mostly white wines, press the "WHITE" button (2) and the wine cellar will maintain an
average temperature between 7° to 10 °C.
Pushing the "RED" button (4) will yield an average temperature between 13 °C to 16 °C – ideal for
red wines.
How to change the temperature

The wine cellar can be set to any temperature you desire to accommodate your wine storage
requirements. To set the temperature, press both the "WHITE" (2) and "RED" (4) buttons
simultaneously and hold for approximately 3 seconds.
Now you are in temperature set mode. Decrease the temperature by pushing the "WHITE" button
(2) and increase the temperature by pressing the "RED" button (4). Pressing the appropriate button
3 times will adjust the temperature 3 degrees, press 4 times equals 4 degrees, 5 times equals 5
degrees, and so on. Once you have selected the temperature you desire, push the
Now the wine cellar is programmed and the LED readout will return to current internal
temperature reading.
Interior Light

To complement the look of your wine collection, a light has been built into the wine cellar.
Simply push the
efficiency, leave light off when not viewing your collection.

When door is open the light will go on. Upon closing the door, the light will go off.
P2M053STD-Ver1.1
button and the light comes on, push again for off. For maximum energy
8
button (5).
GB