Introduction; Intended Use; Model Variants - proemit sunbar 150 Serie Manual De Instrucciones

1. Introduction

Dear customer,
Thank you for purchasing our product. You have purchased a product which was built
based on state-of-the-art technology.
In order to maintain this condition and to ensure safe operation of the product, compli-
ance with this Operating Manual is mandatory.
This Operating Manual is exclusively intended for this product. The manual includes
instruction for the initial start-up and handling. Please take this into account when pass-
ing this product on to third parties.
Therefore, we recommend to maintain this Operating Manual for future reference.

2. Intended use

The lamp is used for interior lighting. The lamp is intended to operate while suspended
from the ceiling. The mains voltage is used to operate the lamp (see chapter "Technical
data").
Compliance with the safety instructions and all other information in this Operating Man-
ual is mandatory. Read the entire Operating Manual carefully before the initial start-up.
Check the unit for damage after unpacking. If the unit is damaged, return it to the point
of sale. The lamp contains built-in LED lights. The light source of this lamp must only be
replaced by the manufacturer, by a service technician or by an authorised person with
similar qualifications.
The manufacturer cannot be held responsible for personal injury and/or property dam-
age due to improper usage.

3. Model variants

The following sunbar models are available:
• sunbar 150 A (1 LED bar, 1 driver 150W, dimable at driver)
• sunbar 150 B (1 LED bar, 1 driver 150W, dimable at casing)
• sunbar 150 B (3 LED bars, 1 driver 450W, dimable at casing)
16
The product meets the requirements of the applicable European
and national guidelines. Conformity has been verified and the cor-
responding declarations and documents have been deposited
with the manufacturer.