Hilti SF 6-A22 Manual De Instrucciones Original página 22

Total vibration
Vibration emission value for drilling in metal (a
Uncertainty for drilling in metal (K)
Vibration emission value for hammer drilling in concrete (a
Uncertainty for hammer drilling in concrete (K)
5 Operation
Inserting the battery
CAUTION
Risk of injury. The drill/driver may start inadvertently.
▶ Before fitting the battery, check that the drill/driver is switched off and that the switch safety
lock is activated.
CAUTION
Electrical hazard. Dirty contacts may cause a short circuit.
▶ Before inserting the battery, check to ensure that the battery terminals and the contacts in the
drill/driver are free from foreign objects.
CAUTION
Risk of injury. If the battery is not fitted correctly it may drop out and fall.
▶ Check that the battery is securely seated in the tool so that it cannot drop out and fall, thereby
presenting a hazard to other persons.
Removing the battery
Fitting and adjusting the side handle
Fitting the belt hook (optional)
WARNING
Risk of injury. A falling power tool may present a risk of injury to yourself and others.
▶ Check that the belt hook is fitted securely before beginning work.
The belt hook allows the power tool to be attached to a belt worn by the operator. The
belt hook can be fitted to allow attachment on the left or right side of the body.
Fitting or removing the drill bit
Fitting or removing the bit adapter / bit
Drilling
CAUTION
Risk of injury. The accessory tool may suddenly stall, causing the power tool to rotate about its
own axis.
▶ Use the power tool with the side handle fitted and always hold it securely with both hands.
▶ Always grip the side handle at its outermost end.
CAUTION
Risk of injury. Risk of flying fragments.
▶ Wear eye protection.
SF 6H-A22
Hammer drilling
Screwdriving
Selecting the gear
Setting forward or reverse rotation
16 English
SF 6-A22
) 2 m/s²
h,D
1.5 m/s²
) •/•
h,ID
1.5 m/s²
2118917
SF 6H-A22
2 m/s²
1.5 m/s²
4 m/s²
1.5 m/s²
2
3
4
9
5
5
6
6
6
7
8
*2118917*