Technical Data - Blaupunkt MS6000 Manual De Instrucciones

ACCESSORIES
Work clamp
Dust bag
Wrench
Support stand
Blade: 0 210
Extension rail
We recommend that you purchase your
accessories from the same store that sold you the
tool. Refer to the accessory packaging for further
details. Store personnel can assist you and offer
advice.
CUTTING CAPACITY
0º/0 º
0º/45 º
45º/0 º
45º(right)/45 º
OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the instruction book carefully.
INTENDED USE
The electro-tool is intended as a stationary machine for making
straight lengthways and crossways cuts in wood. Horizontal
mitre angles of 5º to 45º as well as vertical bevel angles of Oº to
45 º are possible
ASSEMBLY
WARNING: To prevent the accidental starting that could
cause possible serious personal injury, ALWAYS assemble all
parts to your saw BEFORE connecting it to the power supply. The
saw should NEVER be connected to a power supply when you
are assembling parts, adjusting, installing or removing blades, or
when not in use.
1.DUST EXTRACTION PORT (SEE FIG. A)
To reduce buildup of sawdust and maintain top efficiency of
cutting, the sawdust collection can be achieved by clipping
adjust bag on the dust extraction port (16).
A dust bag is provided for use on your mitre saw. To install it,
simply fit the dust bag over the extraction port on the upper
blade guard.
To empty the dust bag, remove it from the dust exhaust port,
open the dust bag by unzipping the slide fastener.
NOTE: To ensure optimal dust collecting, empty the dust bag
when it becomes filled to approximately 2/ 3 of its capacity.
2 . TABLE EXTENSION RAIL (SEE FIG. 81,82)
To install table extension rail, simply insert ends of extensions
into the holes in either or both sides of the base. Secure them in
place by tightening clamp screw on the base.
The table extension rail is used for supporting the long pieces.

TECHNICAL DATA

Rated voltage
1
1 Rated input power
No load speed
1
Bevel capacity
1
Mitre capacity
1
2 Blade size
Double insulation
Machine weight
120*55mm
120*28mm
80*55mm
80*28mm
230-240V~50Hz
16
FIG.A
17
1
FIG.B1
2
FIG.B2
1300W
4500/min
0 - 45°
0 - 45°
210mm
6.52 kg
2
17
1