GMP 10 kVA Manual Del Usario página 113

 Lock: indicate a breakdown of the UPS or one of its parts. Locks are normally preceded by an alarm signal. In the
event of a fault and resultant breakdown of the inverter, the inverter will be switched off and the load will be powered by
the bypass line (this procedure is excluded for breakdowns caused by high and persistent overloads and by short
circuits).
CODE
L01
L02
L03
L04
L05
L06
L07
L08
L09
L10
L11
L12
L13
L14
L15
L16
L17
L18
L19
L20
L21
L22
L23
L24
L25
L26
L27
L28
L29
L30
L31
L34
L35
L36
L37
L38
L39
L40
L41
L42
L43
L44
Incorrect auxiliary power supply
One or more internal cables disconnected
Phase 1 input fuse broken or input relay locked (will not close)
Phase 2 input fuse broken or input relay locked (will not close)
Phase 3 input fuse broken or input relay locked (will not close)
BOOST stage overvoltage positive
BOOST stage overvoltage negative
BOOST stage undervoltage positive
BOOST stage undervoltage negative
Static bypass switch fault
L1 bypass output breakdown
L2 bypass output breakdown
L3 bypass output breakdown
Phase1 inverter overvoltage
Phase2 inverter overvoltage
Phase3 inverter overvoltage
Phase1 inverter undervoltage
Phase2 inverter undervoltage
Phase3 inverter undervoltage
Direct voltage at output of inverter or Sine wave of Phase1 inverter distorted
Direct voltage at output of inverter or Sine wave of Phase2 inverter distorted
Direct voltage at output of inverter or Sine wave of Phase3 inverter distorted
Overload at output of Phase1
Overload at output of Phase2
Overload at output of Phase3
Short circuit at output of Phase1
Short circuit at output of Phase2
Short circuit at output of Phase3
Phase 1 output fuse broken or output relay locked (will not close)
Phase 2 output fuse broken or output relay locked (will not close)
Phase 3 output fuse broken or output relay locked (will not close)
Heat sink Phase 1 overtemperature
Heat sink Phase 2 overtemperature
Heat sink Phase 3 overtemperature
Battery charger overtermperature
Temperature probe of heat sink Phase 1 faulty
Temperature probe of heat sink Phase 2 faulty
Temperature probe of heat sink Phase 3 faulty
Temperature probe of battery charger faulty
BOOST battery 1 fuse blown
BOOST battery 2 fuse blown
BOOST battery 3 fuse blown
DESCRIPTION