● Bearings, Screws, brakes and Wheels
Your electric scooter is made up of moving parts, which in time, will be susceptible to wear and tear.
Bearings and screws:
The electric scooter has sealed and dustproof bearings so that no lubrication is required. Check the
bearings for wear at regular intervals to avoid unsafe riding. Do not jump on and off and do not apply
excessive force otherwise to avoid damage to the bearings. This is not a sports electric scooter.
Make sure that all screws are properly tightened to avoid unsafe situations.
Please check the screws regularly and tighten if they seem loose.
Brakes:
Check the brake for wear at regular intervals to avoid unsafe riding. Do not apply excessive force to avoid
damage to the brake.
Wheels:
Check the wheels for wear at regular intervals to avoid unsafe riding.
Electric scooters come with different wheels but can in general be separated into tires with inflatable inner
tubes and solid wheels.
For inflatable tires, please make sure to keep the right pressure, as hard tires will last longer.
If the wheel seems wobbly even after screws are tightened, the bearings might be
worn down and need replacement
WARNING
Please make sure to check that the steering system is correctly adjusted and that all
●
connection components are firmly secured and not broken before riding, refer to handle
assembly and safety instruction.
Please read operation guide and warnings of correct techniques for use and braking
●
Always wear shoes.
●
We highly recommend to always wear helmet/pads for your own protection.
●
Self‐locking nuts and other self‐ locking fixings may lose their effectiveness.
●
All parts and materials of electric scooter cannot be changed, modifications of the scooter are
●
not allowed. If done, then warranty is void.
● Storage and cleaning
If your Electric scooter gets dirty, please clean it with a damp cloth only, you may not use pressured
water‐gun or running water, as this could damage vital parts. It is also possible to use a little toothpaste if
the dirt is stuck. Remember to clean with damp cloth after this.
Please make sure to keep the electric scooter turned off while cleaning it, and make sure to cover the
charging input to avoid problems with the electronics.
Make sure to dry the scooter with a towel, should it become wet.