Unit Window Installation; Internal Fixing Of The Unit - BONAIRE 4500E Manual Del Proprietário

BONAIRE WINDOW COOLER
Installation

Unit Window Installation

DO NOT

Internal Fixing of the Unit


IT IS MANDATORY THAT THE METAL FIXING BRACKETS SUPPLIED ARE FITTED TO
ENSURE A SECURE INSTALLATION. Utilize the 2 fixing brackets and 8 screws provided (4 x
Screw – 16mm Hi-Lo hex head and 4 x Screw – No. 8 x 1¼ pozi-drive) as shown in the diagram
to ensure the unit is adequately locked into position.

Ensure that the bracket is aligned within the indicated mounting track area on the underside of
the fan housing – see diagram below. Drill 2x1/8" (3.2mm) holes and insert screws into unit as
per diagram and repeat for window frame with appropriate screws.

Ensure that the cooler is now fixed rigidly to the house structure













Close the window against the unit. Measure the gap of
the leftover window opening & then cut and fit an in-fill
panel to seal this gap (materials not provided). Seal any
gaps with silicone.

Check that the unit is still level using spirit level on top
edge of Rear Filter Panel.
Installation
connect the power to the cooler until the installation is complete.
Page | 11