Graco Size4Me Manual De Instrucciones

To Remove Existing Harness Tongues and Buckle and Attach Replacement Buckle
You will receive ONE of
these Graco approved
replacement buckles.
Follow instructions for
proper installation.
4
Pull harness straps
through seat back and
seat pad.
7
Remove and
discard tongues.
11
Re-insert straps back onto splitter plate.
Size4Me MySize
®
Buckle Replacement Guide
1
Squeeze handle and
pull up on headrest to
highest position.
5
Remove chest clip.
DO NOT DISCARD
the chest clip.
8
Slide NEW buckle
onto harness straps.
MAKE sure not to
twist straps.
Fit4Me
® ®
2
To loosen straps,
lift lever and pull
harness straps.
6
9
Re-attach chest clip.
MAKE sure not to
twist straps.
Turn page over to
the assembly
Steps 12 to 21
for the buckle
replacement.
Headwise
®
©2014 Graco PD246350C 3/14
Remove harness
3
strap loops from
splitter plate.
Unbuckle harness
by tilting top of
buckle down,
press top of
red button, and
pull tongues
out of buckle.
10
Re-insert straps through slots
in seat pad and seat back.
See carseat owner's manual
for proper height setting for
your child.