Description And Specifications Description; Icons - RIDGID HB382 Manual De Instrucciones

Hydraulic Pipe Bender
• Pipe moves during bending and can cause striking
or crushing injuries. Be sure there is adequate clear-
ance around the pipe before bending.
• Hydraulic benders use high pressure fluid to gen-
erate large forces. High pressure fluid can pene-
trate skin. Large forces can break and throw parts,
causing serious injury. Stand clear of the unit during
use and always wear appropriate protective equip-
ment, including eye protection.
• One person must control the work process and
machine operation. Only the operator should be in
the work area when the machine is operating. This
helps reduce the risk of injury.
• Read and understand this manual, and the warn-
ings and instructions for all equipment being used
with this tool before operating. Failure to follow all
warnings and instructions may result in property dam-
age and/or serious injury
• Use the Hydraulic Pipe Bender only with RIDGID
Hydraulic Pipe Bender attachments as directed
in these instructions. Other uses or modifying the
Hydraulic Pipe Benders may damage the tool, the
attachments or cause personal injury.
The EC Declaration of Conformity (890-011-320.10) will
accompany this manual as a separate booklet when
required.
If you have any question concerning this RIDGID
– Contact your local RIDGID distributor.
– Visit www.RIDGID.com or www.RIDGID.eu to find
your local RIDGID contact point.
– Contact RIDGID Technical Services Department at
[email protected], or in the U.S. and
Canada call (800) 519-3456.
Description And Specifications
Description
RIDGID ® Hydraulic Pipe Benders allow precision cold
bend ing of metallic pipe from
unit). The tip-up wing configuration of the RIDGID Hydraulic
Bender allows easy access to the pipe for set up and
removal. Benders are available in both manual and elec-
tric versions. An open wing version is available for ease of
pipe loading and unloading.
The RIDGID Hydraulic Benders are generally designed to
bend the following types of pipe:
• EN 10255 Medium and Heavy Series
• ASTM A53 Schedule 40 and 80
• DIN 2440, 2441 Series
4
® product:
1 / " to 3" (depending on the
4
• BS 1387 Medium and Heavy Series
• GB/3091 (ISO 559) Medium and Heavy Series
Pipe with thicker walls and/or high hardness (over 75
HRb)/strength (over 66 ksi/455 MPa Tensile) may not be
able to be bent. Pipe with comparable outside diameter and
wall thickness to the pipes listed may be able to be bent
depending on pipe material characteristics. Pipe with thin-
ner walls can be bent but may experience issues with
kinking or buckling in the bend area.

Icons

Do not dispose of
electrical equipment
with household waste
Fill Port
Weight
Cylinder
Bending
Frame
U-Bracket
Corner
Supports
Figure 1 – Hydraulic Pipe Bender 2" and 3" Manual Unit
Figure 2 – Hydraulic Pipe Bender 2" and 3" Electric Unit
Power ON
Power OFF
Pump Handle
Pins
Straightening
Former
Formers