Juiceman JM1000M Manual Del Usuario página 8

TROUBLESHOOTING FOR THE
JUICE EXTRACTOR
PROBLEM POSSIBLE CAUSE
Juice extractor will The juice extractor
not start when speed portion of the
button is depressed. appliance may not be
assembled correctly.
The motor of the juice • Pulp container may
extractor seems to be be full.
struggling. • Pulp may have
collected under the
lid.
• The speed selected
may not be correct
The juice extractor The filter basket may
has stopped producing be blocked.
juice.
The juice extractor is High fiber fruits and
not producing as much vegetables may be
juice as expected. clogging the filter.
Appliance stops Motor may be
running. overheating.
OVERHEAT PROTECTION SYSTEM
Important: This appliance contains a PTC overheat protection system. When
the appliance is being operated for too long or with too much load, the PTC
protector will shut down the power of the appliance to protect the unit. If the
power shuts down, unplug for 20 minutes and plug in for normal operation.
14
SOLUTION
Check the ASSEMBLY
instructions found on pages
8 and 9.
• Turn off the appliance.
Empty the pulp container.
Do not allow the pulp
container to get too full.
• Turn off and unplug the
appliance. Disassemble
the appliance and take off
the lid. Wash thoroughly
and return to appliance
following the assembly
instructions.
• Check the
RECOMMENDED SPEED
guide on pages 10 and 11.
Turn off and unplug the
appliance. Disassemble the
appliance and take off the
lid. Wash thoroughly and
return to appliance following
the assembly instructions.
Turn off and unplug the
appliance. Disassemble the
appliance and take off the
lid. Wash thoroughly and
return to appliance following
the assembly instructions.
Unplug appliance and allow
it to cool approximately
5 minutes before continuing
use.
NOTES
15