Teka Hydroclean ® Function - Teka HLB Guía De Uso

appears on the screen. The control panel is
now locked.
To deactivate this feature touch and hold
the button again until you hear a beep and
the symbol disappears.
LOCKING THE DOOR MANUALLY
Only available for pyrolytic models.
For pyrolytic models, the child safety lock
includes a door lock which prevents it from
being opened.
To open the door, the child safety lock must
be deactivated following the above-mentioned
instructions.
Teka Hydroclean
This feature helps to clean any grease and
other deposits from the sides of the oven.
Avoid letting deposits build up to make cleaning
easier. Clean the oven often.
PROGRAMMING THE TEKA
HYDROCLEAN FUNCTION
®
WARNING
Do not pour water into the hot oven as this
can damage the enamel.
Always run the cycle when the oven is cold.
Results may be affected if you do so while the
oven is too hot and in addition can damage the
enamel.
First remove the trays and all accessories from
inside the oven, including the tray runners and
telescopic guide rails.
function
®
WARNING
Before activating the lock, be sure that the
oven door is closed properly. If the door
is not properly closed, it will not lock, an
audible signal will sound and the symbol will
flash on the screen
If this happens, close the door until the
warning disappears and the lock works.
If you do not want to lock the door, deacti-
vate the child safety lock.
To clean these, follow the instructions in
the Installation and Maintenance booklet
that comes with your oven.
1. With the oven cold, spread a cloth on the
bottom of the oven.
2. Slowly pour 200 ml of water onto the bottom
of the oven.
INFORMATION
For best results, add a teaspoon of mild
washing-up detergent to a glass of water
before pouring it onto a cloth.
English
.
43
User's Guide