Applying The Cuff - Walgreens Well Manual De Instrucciones

Each press will increase the number by one in a cycling
manner. Press the DATE/TIME SET button
confirm the entry, and the screen will show a blinking
number representing the DAY.
3. Change the DAY, YEAR,
HOUR, & MINUTE as
described in Step 2.
above, using the +
button to change
the numbers and the
DATE/TIME SET button
to confirm the entries.

APPLYING THE CUFF

1. Remove all watches, wrist jewelry,
etc. prior to attaching the wrist
monitor. Clothing sleeves should
be rolled up and the cuff should
be wrapped around bare skin for
correct measurements.
2. Apply cuff to left wrist with palm
facing up as shown in Fig. A.
3. Make sure the edge of the cuff is
about 1/4"~1/2" (1 cm) from the
palm as shown in Fig. B.
repeat process to set DAY, YEAR,
HOUR, and MINUTE
16
again to
Press the button
blinking MONTH
increasing MONTH
confirm the entry
Fig. A
Fig. B