Honeywell HTF1220 Serie Manual Del Propietário página 3

OPERATION
• Place your fan on a level and dry surface.
• Plug the power cord into a polarized 120 Volt AC wall outlet. Please make sure the speed control is in
the off position.
Speed Control
Speed is controlled by pressing the Control Pad button to the desired setting:
0 - Off 1 - Low 2 - Med
Oscillation Control To make the fan oscillate, push down on the oscillation knob located on the top of
the motor housing. To stop the fan from oscillating, pull up on the oscillation knob
when the fan is in the desired position.
Tilt Control The airflow can be adjusted upward or downward by tilting the fan head as desired.
To change the tilting angle of the fan head assembly, simply move the fan head to
the desired angle.
Height Adjustment
Turn the pole locking nut counterclockwise to loosen the pole. Adjust the pole to
(HSF1630 series only)
the desired height and firmly tighten the locking nut in a clockwise direction.
CLEANING AND STORAGE
• UNPLUG the fan before cleaning.
• Use only a soft, damp cloth to gently wipe the fan clean.
• DO NOT immerse the fan in water and never allow water to drip into the motor housing.
• DO NOT use gasoline, paint thinner or other chemicals to clean the fan.
Removal of the Front Grille for Cleaning
• UNPLUG the fan and remove the Front Grille by releasing the clips.
• Unscrew the Blade Nut by turning it CLOCKWISE (REVERSE THREAD).
• Pull the Fan Blade away from the Motor Housing.
• Gently wipe the Fan Blade and Grilles with a damp cloth.
• Re-assemble the fan by following the steps in ASSEMBLY OF BLADE AND GRILLE INSTRUCTIONS.
• For storage, disassemble and clean the fan carefully as instructed and store in its original box. You
may leave the fan assembled and covered to protect it from dust. Store the fan in a cool, dry place.
CONSUMER INFORMATION
Please be sure to specify a model number.
Call us toll-free at: 1-800-477-0457
E-mail: [email protected]
Or visit our website at: www.HoneywellPluggedIn.com/fans
4
3 - High
1 YEAR LIMITED WARRANTY
You should first read all instructions before
attempting to use this product.
A. This 1 year limited warranty applies to repair
or replacement of product found to be
defective in material or workmanship.
This warranty does not apply to damage
resulting from commercial, abusive,
unreasonable use or supplemental
damage. Defects that are the result
of normal wear and tear will not be
considered manufacturing defects under
this warranty. KAZ IS NOT LIABLE FOR
INCIDENTAL OR CONSEQUENTIAL DAMAGES
OF ANY NATURE. ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE ON THIS PRODUCT IS
LIMITED IN DURATION TO THE DURATION OF
THIS WARRANTY. Some jurisdictions do not
allow the exclusion or limitation of incidental or
consequential damages or limitations on how
long an implied warranty lasts, so the above
limitations or exclusions may not apply to you.
This warranty gives you specific legal rights,
and you also may have other rights which vary
from jurisdiction to jurisdiction. This warranty
applies only to the original purchaser of this
product from the original date of purchase.
B. At its option, Kaz will repair or replace this
product if it is found to be defective in material
or workmanship.
C. This warranty does not cover damage
resulting from any unauthorized attempts
to repair or from any use not in accordance
with the instruction manual.
Call us toll-free at 1-800-477-0457
or e-mail: [email protected]
Please be sure to specify a model number.
NOTE: IF YOU EXPERIENCE A PROBLEM,
PLEASE CONTACT CONSUMER RELATIONS
FIRST OR SEE YOUR WARRANTY. DO NOT
RETURN TO THE ORIGINAL PLACE OF
PURCHASE. DO NOT ATTEMPT TO OPEN THE
MOTOR HOUSING YOURSELF, DOING SO MAY
VOID YOUR WARRANTY AND CAUSE DAMAGE
TO THE FAN OR PERSONAL INJURY.
5