Playing A Compact Disc (Cd); Random Play; Repeat Function; Program Function - Denver Electronics MC5220 Manual De Instrucciones

• Never use benzol, benzene, or other strong chemical cleaners, as these could damage the
finish.
DO:

PLAYING A COMPACT DISC (CD)

NOTE: Never touch the laser lens inside of the CD compartment. Clean the laser lens with a CD
cleaner disc if it becomes dirty.
1. Press the Standby button to turn on the unit
2. Press the Function Switch to CD mode.
3. Open the CD DOOR and insert a CD into the tray with printed label side facing up.
4. Close the CD DOOR and the disc will rotate for a few seconds and then stop.
5. Use the or
6. Press the
7. Press the
8. To stop the album temporarily, press PAUSE button, to resume, press again

RANDOM PLAY

• In CD stop mode, Press the REPEAT button on the remote until "RAND" will appear on
LCD Display.
• Then it will enable random tracks play.

REPEAT FUNCTION

1. Press the MODE button on the remote once during playback, the "
LCD display. The same track will be repeated over and over.
2. Press the MODE button on the remote a second time to repeat all tracks. The "
sign will show on the LCD display.
3. To cancel REPEAT PLAY, Press the MODE button on the remote repeatedly until the all
sign disappeared.
REVERSE/FORWARD
1. The CD Reverse
number or to scan disc tracks at high speed.
2. Press the CD Reverse
two or more times to hear previous tracks on the disc.
3. Press the CD
4. Press and hold the
the previous track(s); When the desired track section is found, release the button and
normal play will resume.
5. Press and hold the
next track(s); When the desired track section is found, release the selected button and
normal play will resume.

PROGRAM FUNCTION

The Program feature can be used to program up to 20 tracks to play in a selected order.
1. While in the stop mode only (CD is not playing), press the PROG/TIME SET Button, LCD
Display will show the wording "PROGRAM 01" and "PROGRAM 01" starts to flash.
2. Press the
3. Press the PROG/TIME SET BUTTON to select and store the track into memory.
button to choose a track
BUTTON to start play
BUTTON again to PAUSE play.
and CD Forward
button once to hear the beginning of the current track. Press it
button to hear the next track on the disc.
Button, the current track will be scanned and move backwards to
Button, the current track will be scanned and move forward to the
or button to allocate the desired track.
DO NOT:
Buttons can be used to jump to a different track
ENG-7
" sign will show on
ALL"