Electrical Connection - ELICA EPT436SS Guía De Instalación, Uso Y Mantenimiento

Electrical connection

WARNING
Electrical Shock Hazard
Warning: Turn off power circuit at the service panel
before wiring this unit.
120 VAC, 15 or 20 Amp circuit required.
ELECTRICAL GROUNDING INSTRUCTIONS
Failure to do so can result in death or electrical
shock.
Facing the front of the range hood, remove the left
knockout and the Junction box cover and install the
B. Junction box wall cover
•
B
C
Electrical connections:
•
•
box.
•
wire from the junction box.
• Push wires into junction box.
• Secure junction box cover with original screws.
Mounting the duct cover
• Position the duct cover over the mounted hood.
• Slide the bottom of the duct into the glass area.
• Position the top of the duct over the duct mounting
bracket. If a telescopic duct cover is used, grab the
upper part of the telescopic duct cover, pull it and place it
in the duct cover mounting bracket.
• Secure the top of the duct with 2 assembly screws
provided.
• Secure the bottom of the duct with 2 assembly screws
provided.
B
9