DeFelsko PosiTest HHD Manual De Instrucciones página 16

Check Battery: A low or defective battery will not be able to
PosiTest HHD turns OFF while in use
sustain the power required to operate the PosiTest HHD. Charge
or replace the battery. To determine if the battery is defective
refer to Battery Charging (pg. 12).
When generating high voltage, the PosiTest HHD display is
The PosiTest HHD integrated jeep/crest meter ALWAYS displays
lower than the test voltage.
the actual voltage being generated. Although the PosiTest HHD
will regulate the output voltage to match the test voltage, there
are circumstances when it is not possible to generate the test
voltage. For example, overloading of the electrode by setting the
voltage higher than recommended for the coating system under
inspection may result in a generated voltage lower than the test
voltage. Reducing the brush or electrode size will also reduce
loading.
Accessories
14