Tabla de contenido
Idiomas disponibles
Idiomas disponibles
entire
tool
as the branch
falls.
_
ARN|NG:
Bo
not
let
the
JawSaw
fall
to the
ground
at the
completion
of the
cut,
this
may
_mage
the
tool
SAW MAINTENANCE
AND
KICKBACK SAFE
Follow
maintenance
instructions
in this
manual.
Proper
cleaning
of saw
and chain
and
guide
bar maintenance
can
reduce
chances
of
kickback,
inspect
and maintain
saw after
each
use.This
will
increase
the service
life of your
saw.
NOTE."
Even with
proper
sharpening,
risk of
kickback
can increase
with
each
sharpening.
MAINTENANCE
AND
STORAGE OF JAWSAW
1.
Unplug the JawSaw from power source:
*
When not in use.
*
When transporting.
*
When left unattended.
*
Before servicing.
o
Before fitting the extension
pole.
*
Before cleaning.
*
Before changing
accessories
or
attachments,
such as saw chain and
guard.
2.
inspect the saw before and after each use
for:
*
Any signs of damage, especially
the
power cord.
*
Smooth
action of push handle and
movement
of bar.
*
Adequate
chain tension.
*
Adequate
chain lubrication.
3.
Do not use the JawSaw, if:
*
The trigger
switch or lockout is
malfunctioning.
*
The push handle does not smoothly
return under spring force.
*
Any other damage which affects the safety
or operation
is evident.
4.
Maintain
the JawSaw with care and have
any damage
or malfunction
repaired by
an authorized
service center (contact
1-866-354-9679):
o
Never expose the JawSaw to rain.
*
Keep chain sharp, clean, and lubricated
for better and safer performance.
*
Follow steps outlined
in this manual to
sharpen chain.
*
Keep handles clean and free from oil.
o
Keep all screws and nuts tight.
o
Never carry the JawSaw
by the power
cord.
o
Never yank the power cord to unplug
it.
*
Keep power cord away from heat, oil and
sharp edges.
o
Inspect extension
cords and do not use if
damaged.
5.
When servicing,
use only identical
replacement
parts.
6.
When not in use, always store JawSaw
*
in a high or locked place, out of children's
reach.
*
in a dry place.
REPII_C|NG
SAW CHA|N/CHA|N
HAR
Replace chain when cutters are too worn
to sharpen or when chain breaks. Only use
replacement
chain noted in this manual.
Always include new drive sprocket when
replacing
chain.This will maintain
proper
driving
of chain. Inspect guide bar before
sharpening
chain. A worn or damaged
guide
bar is unsafe. Aworn
or damaged
guide bar
will damage
chain, it will also make cutting
harder.
To Replace the bar, remove the mounting
plate
(a), which is retained by a single screw.
To fit to the new bar, fit the mounting
plate
(a) into the new bar by tightening
the screw
clockwise.The
projecting
tab (f) must be fitted
through the bar slots outwards.
(See Fig.
F&G 1)
SHARPENING
SAW CHAIN
_
ARNING"
Unplug
JawHaw
from
power
source
before
se_icing.
Severe
injury
or death
could occur from
electrical
shock
or body
contact
with
moving
chain.
_
AHN|NG:
Cutting
edges on chain
are sharp. Use protective
g|oves
when hand|ing
chain.
Tabla de contenido
