Tabla de contenido
60
UPKEEP AND SMALL ADJUSTMENTS
TALL UNITS WITH CONCEALED DOORS
ADJUSTMENT OF STOPS
AFTER CHECKING THE TALL UNIT IS CORRECTLY ALIGNED, PULL THE DOOR OUT AND MAKE SURE IT HOOKS
ONTO BOTH THE UPPER AND LOWER STOP SIMULTANEOUSLY. IF THIS IS NOT THE CASE, MAKE THE FOLLOWING
ADJUSTMENT.
1. ADJUST THE TILT OF THE UPRIGHT. 2. INCREASE OR DECREASE THE FORCE OF THE STOP.
1
TALL UNITS WITH CONCEALED DOORS
ADJUSTMENT OF STOPS
CHECK THAT THE DOOR IS POSITIONED 1.5MM AWAY FROM THE UPPER AND LOWER EDGE OF THE TALL UNIT.
IF NECESSARY, ADJUST THE DOOR HEIGHT-WISE AS FOLLOWS.
1. RELEASE THE ADJUSTMENT. 2. RAISE OR LOWER THE DOOR BY ADJUSTING SCREW A.
2. LOCK THE ADJUSTMENT.
ADJUSTMENT FOR R/H DOOR
2
STOP
UPRIGHT
ADJUSTMENT FOR L/H DOOR
A
UPKEEP AND SMALL ADJUSTMENTS
61
A
Tabla de contenido
