Tabla de contenido
52
UPKEEP AND SMALL ADJUSTMENTS
CLEANING BEHIND THE PLINTH.
BY HARDLY CLEANING IT BECOMES NECESSARY TO ARRIVE TO THE AREA BEHIND THE PLINTHS. TO REMOVE THEM IT IS
ENOUGH TO STARTING FROM AN END CORNER.
LATERAL PLINTH. IN CASE OF LATERAL CORNERS WITH LATERAL PLINTHS, THE CORNER JUNCTION IS SIMPLY
SCREWED TO THE FRONTAL PLINTH.
PLINTH RE-HOOKING. RE-PLACE THE PLINTH MAKING SURE THAT THEY ARE WELL FIXED TO THE FEET.
HOOD FILTER WASHING.
THE FILTERS OF THE FILTRATING HOODS HAVE TO BE CLEANED PERIODICALLY. IN ORDER TO RELEASE THEM OPEN THE
STOPPER PULLING THE LEVER IN THE MIDDLE OF EVERY FILTER.
CLEANING OF THE HOOD FILTERS. YOU CAN WASH THE FILTERS IN THE DISHWASHER USING A STANDARD PROGRAM.
P-ONE DUSTBIN
ADJUSTMENT
MAKE SURE THE ADJUSTMENT BLOCKS ON THE LID ARE IN THE MINIMUM EXCURSION POSITION.
OPEN THE EXTRACTOR AND MAKE SURE THE LID CASTORS ARE RESTING AGAINST THE ALUMINIUM SIDES OF THE BIN.
IF THE DISTANCE BETWEEN THE ADJUSTMENT BLOCK AND THE LID IS 10MM, THIS MEANS THAT WHEN THE EXTRACTOR
IS IN THE CLOSED POSITION, THE LID SITS OVER THE BIN BAGS CORRECTLY. IF YOU HEAR SLIGHT SCRATCHING SOUNDS
DURING THE OPENING OR CLOSING OF THE EXTRACTOR, RAISE THE LID BY ADJUSTING THE SCREWS ON THE TWO
ADJUSTMENT BLOCKS.
FRONT VIEW WITHOUT DOOR
LID ADJUSTMENT MECHANISM
UPKEEP AND SMALL ADJUSTMENTS
53
Tabla de contenido
