Belkin OmniView Manual De Instrucciones página 59

4-5 Device Settings
Dynamic DNS Settiings
1. Enable Dynamic DNS
This enables the Dynamic DNS service. This requires a configured DNS server
IP address.
2. Dynamic DNS Server
The RIPM registers itself in regular intervals at this location. At the time of
this publication, the dynamic DNS is a fixed setting since only dyndns.org is
currently supported.
3. Host Name
RIPM is the host name provided by the dynamic DNS. Use the whole name,
including the domain, i.e., "testserver.dyndns.org" (or "RIPM.dyndns.org"), and
not just the actual host name.
4. Username
During your manual registration with the dynamic DNS, you must have
registered this username.
Note: Spaces are not allowed within the username.
5. Password
During your manual registration with the dynamic DNS, you must have
designated this password.
6. Check Time
The RIPM card registers itself in the dynamic DNS at "Check Time".
7. Check Interval
This is the interval for reporting to the dynamic DNS by the RIPM.
Note: The RIPM has its own independent real-time clock. Be careful to ensure
that the time setting of the RIPM is correct.
8. Use the helpful option "Delete saved external IP" if you would like to update
your externally saved IP address. To delete the saved address, press the
"Delete" button.
55
P75075ea_F1DE101Hea_man.indb 55
Menu Options
1
2
3
4
5
6
7
8
8/16/2006 11:33:22 AM