Error Description; Declaration Of Conformity For Devices According To Mid - Diehl Metering 548 Manual De Instalación

Ocultar thumbs Ver también para 548:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

The error message automatically disappears as soon as the source of the
error is corrected. All errors that exist for longer than 6 minutes, are saved
in the error memory.
Error
Description
code
C - 1
Basic parameters saved in flash or RAM have been lost
E 1
Temperature range outside [-19.9 °C...199.9 °C] e.g. sen-
sor short-circuit, sensor break
E 3**
Flow and return sensors interchanged
E 5
Communication not possible (too frequent read-out)
E 6**
Flow direction of flow meter incorrect
E 8
No primary power supply (only with power supply unit);
supply via backup battery
E 9
Battery nearly discharged, design lifetime reached
E A*
Leak: Pipe break detection
E b*
Leak: Energy meter leak detection
E C*
Leak: Leak pulse input 1
E d*
Leak: Leak pulse input 2
* optional ** application dependent
11.

Declaration of Conformity for devices according to MID

Diehl Metering GmbH hereby declares that these products conform to the
essential requirements of the following directives:
ƒ
EMC directive (2004/108/EC)
ƒ
R&TTE Directive (1999/5/EC)
ƒ
MID Directive (2004/22/EC)
ƒ
EMC directive (2006/95/EC)
ƒ
DE-10-MI004-PTB004
ƒ
DE-10-MI004-PTB008
The cooling meter is nationally approved in Germany under 22.75/10.02
Further information is available under www.diehl.com/metering
The signed declaration of conformity is displayed on Page 19.
-34-
Deutsch
English
Français
Español
Tabla de contenido
loading

Tabla de contenido