The Installation Space; Dimensions And Clearances; Side Panels - Cafe CSB42 Manual Del Propietário

THE INSTALLATION SPACE

*Finished Width
6-3/4"
Electrical
85" max
Area
Finished
Opening
24"
5"
Water Supply
3-1/2"
*The finished cutout width must be:
Water And Electrical Locations
The opening must be prepared with the electrical
and the cold water supply located as shown.
The Cutout Depth Must Be 24" (60.96 cm)
The refrigerator will project forward, slightly beyond
adjacent cabinetry for standard installation.
Additional Specifications
required. An individual properly grounded branch
circuit or circuit breaker is recommended. Install
a properly grounded 3-prong electrical receptacle
recessed into the back wall. Electrical must be
located on the rear wall as shown.
• The water line can enter the opening through
the floor or back wall. The water line should be
between the cold water line and water connection
location, long enough to extend to the front of the
refrigerator. Installation of an easily accessible
shut-off valve in the water line is required.

SIDE PANELS

Side panels must be used whenever the sides of the
panels will slip into the side case trim. Secure the
panels to the refrigerator with stick-on hook and loop
fastener strips. Order the side panels from the cabinet
manufacturer.
• Cut a notch in the top front corner as shown to allow
clearance for corner keys in the front side trim.
49-1000081 Rev. 1
Installation Instructions
42" Models 16-1/4"
48" Models 18-1/4"
6-3/4"
75" From Floor
to Bottom
of Electrical
Area
5"
3-1/2"
kit
™

DIMENSIONS AND CLEARANCES

41", or 47"
Case Width
*83-1/2"
at
Rear
42" or 48"
Frame to Frame
Depth Including Handles:
28-7/8"
Product Clearances
These refrigerators are equipped with a 3-position
door stop. The factory-set 115° door swing can be
adjusted to 90° if clearance to adjacent cabinets or
walls is restricted.
115° Door Swing
B
A
Models A B
(33.02cm) (48.26cm) (67.63cm)
(38.1cm) (50.8cm) (72.71cm)
clearance to a wall, for framed and stainless steel
models. If the 90° door stop position is used, pan access
is maintained, but pan removal is restricted.
24"
3/16"
1-7/8"
*84"
*3" to 4"
* Depending on installation height.
2-9/16"
26-1/8"
* Shipping height.
The refrigerator
can be adjusted
to fit into a cutout
*84"
From
(214.63 cm)
Floor
leveling legs
and wheels for
(2.54 cm) height
adjustment.
90° Door Swing
23-7/8"
Behind
Frame
C
C
*Min. Distance
to Wall
17