INSTRUCTIONS FOR USE
NOTE:
The conductive silver pads may be lightly dampened to increase
the stimulus sensation.
Before application of the wrap, using clean water, lightly spray
the pads until they are damp feeling. Never soak the wrap. Do
not allow the controller to get wet. Apply the wrap and proceed
with use as normal.
Press and hold the POWER button for 2 seconds to turn the
10.
device off at any time during treatment.
11.
Be sure the device is OFF (no sensation is felt) before removing
the device from your skin.
12.
To conserve the battery and prevent shocks, the device will
automatically power off when not in use.
13.
If moisture was used, be sure the belt is completely dry before
storage. Consult the Cleaning and Storage portion of this
manual for instruction on how to properly care for and store the
controller and belt.
ENGLISH • 25