Helpful Hints And Tips - Brandt BFL682ZNW Guía De Instalación Y Uso

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 43
Bottle holder
The bottle holder can be used to fix
the bottle. You can place it on the middle
or lower door rack and slide to left or
right as your prefer.

Helpful hints and tips

Energy saving tips
We recommend that you follow the tips
below to save energy.
Try to avoid keeping the door open
for long periods of time in order to
conserve energy.
Ensure the appliance is away from
any sources of heat. (Direct sunlight,
electric oven or cooker etc.)
Don't set the temperature colder than
necessary.
Don't store warm food or evaporating
liquids in the appliance.
Place
the
appliance
ventilated, humidity-free, room. Please
refer to "Installing your new appliance"
chapter.
If the diagram shows the correct
combination for the drawers, crisper and
shelves, do not adjust the combination
as this is designed to be the most energy
efficient configuration.
Hints for fresh food refrigeration
Avoid putting norm food into the
refrigerator, as the internal temperature
will increase resulting in the compressor
having to work harder and will consume
more energy.
Do
cover
or
wrap
particularly if it has a strong flavor.
Properly place the food so that air can
circulate freely around it.
Installing refrigerators in pairs
Your fridge can be installed with
freezer in pairs.
It can be installed by installation
parts supplied like this.
Hints for refrigeration
Meat (All Types)
Wrap and place on the glass
above the vegetable drawer. Always
refer to food storage times and use by
dates suggested by manufacturers.
Cooked food, cold dishes, etc.: They
should be covered and placed on any of
the shelves.
Fruits and vegetables:
They should be stored in the special
drawer provided.
Butter and cheese:
Should be wrapped in airtight foil or
plastic film wrap.
in
a
well
Milk bottles:
Should have a lid and be stored in the
door racks.
Switching off your appliance
If the appliance needs to be switched
off for an extended period, of time the
following steps should be
prevent mould from forming in the
appliance.
1. Remove all food.
2. Remove the power plug from the
mains socket.
3. Clean
thoroughly.
the
food,
4. Ensure that all the doors are wedged
open slightly to allow air to circulate.
18
shelf
taken to
and
dry
the
interior
Tabla de contenido
loading

Tabla de contenido