Maintenance
Fig. 30: Pulling cable pin.
7. The step is separated from the cable and therefore the transmission system.
8. Remove the covers from the drum using an open-ended wrench.
Fig. 31: Transmission system drum covers.
9. The chain's polyamide bearing is freed after removing the drum cover.
10. Wearing gloves, remove the chain from the two crowns.
11. Wearing gloves, pull the pulling cable until you feel that the drum mechanical limit has been reached.
Fig. 32: Removing the pulling cable from the drum.
28/196
Instructions Manual Waterlift rev.0.7 -06/09