Aiwa NSX-4000 Manual De Instrucciones página 56

Al EDIT RECORDING
To
clear the edit program
Before recording, press the
CLEAR button twice so that EDIT in the
display goes out, or press the ~ OPEN/CLOSE button.
To check the edit program
Before recording, press the CD EDiT/REMAIN button.
The program for one side of the tape is displayed each time the
button is pressed. +
-
0 Time remaining on the tape
@ Tape side
@ Total number of programmed tracks
@ Program tracks
To check the order of the programmed tracks
Before recording, press the CD EDIT/REMAIN button to select side
A or B, and press the+- DOWN or --UP button repeatedly.
Each time the button is pressed, the next track (k> button) or
previous track (<< button) in the program is shown in the display.
+D
0 Program number
@ Track number
To
add tracks to the edit program
If there is any time remaining on the tape after step 5, you can add
tracks from other discs in the CD compartment before recording
starts.
1
2
3
4
Press the CD EDIT/REMAIN button to select side A or B.
Press one of the DISC DIRECT PLAY buttons to select a disc.
Press the numeric buttons to select tracks.
PRGM flashes in the display,
If the playing time of a selected track is longer than the
remaining time, it is not added.
Repeat steps 2 and 3 to add more tracks.
Time on cassette tapes and editing time
The total playingtime of the editedtracksmaybe a littlelongerthan
the specifiedtape recordingtime, because cassette tapes gener-
ally have a bit more tape than the time indicated on their labels.
In this case, the excess time (withoutthe minusmark) is displayed
after editing instead of the remaining time (with the minus mark).
.-