Sammic SU-310 Manual De Instrucciones página 8

activate the decompression to release the
tube. If is pressed during vacuum,
the pump will pause and will light up
• , Oil drying: Allows you to keep the
oil in a good condition, reducing the moisture
retained and enabling the pump to reach
maximum vacuum. The cap lowers and the
pump operates continuously for 15 minutes.
Every two minutes the air intake valve is
activated, without stopping the pump. The
central display will indicate the amount of time
in minutes remaining until the end of the cycle.
• Pressing also ends the process
in any of the operating modes listed above.
Stops the programme phase that is currently
running and moves on to the next.
VACUUM PROGRAMMES:
• Press and press
to select the program number from
1 to 25
• Successively press the cycle keys or press
or to select the values.
· VACUUM: choose the vacuum
percentage: 1% to 99%
· VACUUM +: 1s - 15s; only works
if 99% vacuum is selected
· GAS: shows the quantity of gas
filled in %.
· E.g. to select 20% gas and 99% vacuum, the
display will show the final vacuum pressure
99% in the cycle and after filling 20% gas, the
following will show on the display: 99% – 20%
= 79%.
· If the setpoint is 0% NO gas must be filled.
· SEALING: bag sealing time: 0 –
7s
EN
8
· SEALING +: If the machine is
equipped with this system (see initial settings),
to activate it just press and hold the
button until the icon is activated. Increase the
sealing power for metal bags.
· PROGRESSIVE ATMOSPHERE:
gentle air entry into the chamber 0 - 9s
· Press or lower the lid to execute
the cycle, which is also memorised.
• Lowering the lid starts the cycle.
• VACUUM PAUSE: If the
pressed during the vacuum phase, the pump
stops, indicated as such by the symbol
on the display, with the vacuum remaining
active. Press the key once more to start the
pump and continue the vacuum process.
or • If the lock is activated, the packaging
program values CANNOT be changed.
• To unlock a program press
pressing OK flashes. Press
to select ON/OFF. To exit, press
PROCESS OF SWITCHING ON AND
INITIAL ADJUSTMENTS:
In the first three seconds the model number
is displayed on the central display. The
symbol also illuminates and the number of
hours of the pump's operation will appear in
the 11-character display, for controlling the oil
change.
Possible adjustments within the first 3 seconds:
• Model number: Press and hold
for 2s. Adjust the model number by pressing
or
appears:
Model equipped WITH the gas injection
system:
·
continuous operation: SU-600, SU-800, SU-
6000. The pump starts operating from the
moment the main switch is pressed. This
configuration is intended for machines installed
in cold rooms or refrigerated chambers.
·
intermittent operation: SU-600, SU-800, SU-
6000. The pump is in operation during the
vacuuming and sealing stage.
· No. "2": Bench top machines, intermittent
operation: SU-300, SU-400, SU-500. The
pump is only in operation during the vacuuming
stage.
Model WITHOUT gas injection systems: The
same models are configured with the same
pump operation mode as the previous ones, but
without gas.
· No. "3":
· No. "4":
· No. "5":
key is
• SEALING + (optional): If the machine is
equipped with this system, for each model
number chosen by pressing the
the
• Language and date: Press and hold
and
date, time, and temperature:
or
1. LANGUAGE
·
"Francais",
"Português"
press
2. DATE (only models with bluetooth-printer
plate)
· Example date: dd/mm/yyyy
until the model number · When dd flashes press
No. "0": Free-standing machines,
No. "1": Free-standing machines,
symbol will be activated.
for 2 seconds to adjust the language,
"Español" will flash, press
or to select: "English",
"Deutsch" , "Italiano"
or
key,
,