Installation Instructions; Explanation Of Warning Symbols; Safety Precautions - Leviton 1000 Serie Manual De Instalación

3

INSTALLATION INSTRUCTIONS

The following section contains installation and wiring instructions for the Leviton Series 1000,
and Series 2000 meters in either the indoor or outdoor enclosure. If technical assistance is
required at any point during the installation, contact information can be found at the end of
this manual. Leviton is not responsible for damage to the meter caused by incorrect wiring.

3.1. Explanation of Warning Symbols

Indicates the need to consult the operation manual due to the presence of a
potential risk.
Indicates the presence of electric shock hazards. Prior to proceeding,
de-energize the circuit and consult the operation manual.
Indicates that the eq1uipment is protected throughout by double insulation.

3.2. Safety Precautions

• Installation of electric meters requires working with possibly hazardous
voltages. These instructions are meant to be a supplement to aid trained,
qualified professionals. Failure to follow these warnings could result in
death or injury.
• TO AVOID FIRE, SHOCK, OR DEATH, turn off all power supplying the
equipment before performing any wiring operations. Use a properly rated
voltage sensing device to confirm power is off.
• Bonding is not automatic for metal conduit connections; separate bonding
is to be provided.
• Installations should be done in accordance with local codes and current
National Electric Code requirements.
• Equipment used in a manner not specified by this document impairs the
protection provided by the equipment.
WARNING
12