Call Code Settings - ABB M2303 Manual De Instrucciones

ABB-Welcome

4.2.10.4 Call code settings

Fig. 35 Call code settings
To the "call code settings" menu has the following functions:
No. Functions
1 Code type
- Change the code type by ticking the box (automatic switchover) or
pressing the "plus/minus" buttons.
- A user can select and click on a physical address to call an indoor
station.
- A user can select and click on a logic address. (The logic address is set
in the "user list management" menu.)
2 Digit
- When choosing a logic address, you should set the digits of the logic
address by using the "plus/minus" buttons. (01-08 digits are available,
and the digits of the logic address must be consistent with the ones set in
the "user list management" menu.)
"OK"
3
- Click on this button to save the settings.
"Back"
4
- Click on this button to return to the start page.
|
CALL CODE SETTING
Code Type
Physical Address
Digit
05
1
+
2
-
3
OK
4
Back
— 42 —