Appendix; Troubleshooting - Korg electribe Manual De Usuario

sampler will be overwritten, take care not to inadvertently
change the samples, for example if you swapped memory
cards.
• Export ALL PATTERN: Writes all patterns to the memory card.
• Import ALL PATTERN: Loads all patterns that were written to
the memory card by EXPORT ALL PATTERN. All patterns will
be overwritten.
36

Appendix

1. Troubleshooting

The display won't turn on.
□ Have you securely connected the AC adapter?
□ Have you connected the AC adapter to the power outlet?
□ Do you have enough battery charge?
There is no sound!
□ Have you correctly connected the amplifier, mixer or head-
phones to the jack?
□ Have you turned the power on for the amplifier or mixer and
set them correctly?
□ Have you set the Volume knob of the electribe/electribe
sampler to an appropriate level?
Playback won't stop!
□ A Pattern keeps playing back, repeating the selected pattern.
Press the Stop button after playback ends.
The sounds / motion sequence actions have changed
from what I created during editing!
□ Have you completed the write operation after editing?
→ After you have edited, write the data to memory before
switching the pattern in each mode or before you turn off the
power.
I can't control MIDI!
□ Have you correctly connected the MIDI cable?
If you play this system from an external device:
□ Have you correctly set the MIDI channel in global mode? (→
p.14)
If you play an external device from this system:
□ Have you set the same MIDI channel for the receiving device
and for this system?
I don't hear anything when I'm playing on the trigger
pad.
□ Have you saved the part after editing? (→ p.12)
□ Have you turned the Keyboard button ON?
□ Have you disabled the motion sequence? (→ p.12)
I can't seem to use my memory card.
□ Have you formatted the memory card only in your electribe?
→ You need to re-format any memory card that has been format-
ted by a computer or digital camera with this system before it
can use it. (→ p.14)
□ Have you correctly inserted the memory card?
→ Remove and insert the memory card again. (→ p.8)
□ Is the card size supported by this system?
→ This system supports SD cards from 512MB to 2GB, and SDHC
cards of 32GB or less.