Bentel Security B-TEL2 Manual De Instalación Y Usuario página 48

When this option is selected, the dialer will emit a sound signal if there is a PSTN line failure. When this option
is deselected, the dialer will show the PSTN line outage, but will not emit a sound signal.
z Confirm call result - When this option is selected, the dialer will wait for confirmation from the remote user
before sending the voice message. The remote user will send confirmation by pressing the
remote telephone keypad (valid only for touch tone telephones).
z One way radio - When this option is selected, a listen-in session will automatically begin after the cycle of
electronic surveillance messages is sent.
z Call all telemonitoring numbers - When this option is selected, all calls to electronic surveillance programmed
for a single event will be performed. If this option is deselected, the dialer will end electronic surveillance calls
as soon as one is completed properly.
z Call all voice messages numbers - When this option is selected, all voice calls programmed for a single
event will be performed. If option is deselected, the dialer will end voice calls as soon as one is completed
properly.
z Bypass answering machine - This option allows the dialer to share the telephone line with another responding
device (voicemail, fax, etc.). Select this option and the dialer will immediately respond after the first ring, if a single
ring was detected within the last minute.
Codes
- In this section, the Installer PIN (Master) and/or User PIN (Slave) needed to perform the necessary
programming are entered. It is possible to enter PINs of at least 4 up to 6 digits.
Inputs
- The input channel and stop alarm channel activation modes are programmed in this section. For
more information, read the ACTIVATION POLARITY paragraph in the INSTALLATION chapter.
Double-click the appropriate box to set the mode.
Voice messages Page
Voice messages are programmed on this page. The number and duration of messages are set in the Options
Page.
PLAY Button - Press this button to listen to the voice message.
REC Button - Press this button to start recording a new voice message.
STOP Button - Press this button to stop recording or listening to a voice message.
A real-time timer will show the elapsed time while recording or playing a message.
Log Page
On this page, pressing the
It is possible to export the displayed list into a file just pressing the button
48
button allows one to see the list of the last 255 events that occurred.
key of the
.
B-TEL2