Bentel Security B-TEL2 Manual De Instalación Y Usuario página 30

Vocal and digital dialer
ˆ 4 independent alarm channels with priority management.
ˆ Option to control Stop Alarm and Listen-in features remotely by entering a PIN into the remote telephone
keypad.
ˆ Option to associate up to three voice messages for every event, with four message choices:
z
two messages, each 32 seconds long;
z
four messages, each 16 seconds long;
z
one 32 second long message plus four messages, each 8 seconds-long;
z
eight messages, each 8 seconds long.
ˆ Built-in multiprotocol digital communicator.
ˆ Programmable alarm-call activation by positive drop or negative command.
ˆ Programmable PIN to Stop Alarm via device keypad.
ˆ 8 programmable telephone numbers.
ˆ Protection against accidental battery polarity inversion.
ˆ Battery and system status checks.
ˆ 255-element logger (event register).
ˆ Programming by software or keypad.
ˆ Superkey function.
ˆ 2 programmable OC (Open Collector) outputs.
Telephone line
ˆ Test for telephone line cutting.
ˆ Signals telephone line failures on an Open Collector output or with a speaker tone.
ˆ Excluded line tone control.
ˆ Overvoltage protection.
ˆ Programmable tone or pulse dialing.
Interface
ˆ Digital message recording/playback.
ˆ Built-in speaker for message playback.
ˆ Single-digit LED display.
ˆ Alphanumeric command keypad.
Box
ˆ Tamper protection (anti-opening and anti-tearing).
ˆ Compartment for 12 V – 1.2 Ah battery (not provided).
Telephone dialers are signaling devices that can call and send pre-recorded messages to a series of programmed telephone numbers.
The B-TEL2 dialer is available in a plastic box (ABS) that can be attached to the exterior of the control panel to which it must be connected.
The dialer is designed to operate 4 channels, and thus control 4 distinct events (such as the burglar and fire alarms). Alarm messages can be
associated with each channel.
These messages are recorded in the solid-state memory, avoiding the problems associated with using magnetic tape, including: loss of message
quality over time, mechanical hitches after long periods of inactivity, etc...
An internal speaker allows one to check the quality and accuracy of recorded messages.
Programming all the typical parameters of this device is simplified by the use of an alphanumeric keypad and LED display. The device can also
be programmed with the appropriate software.
) ) ) ) ) All programmed data (including alarm messages) are stored in the non-volatile memory for an indefinite length of time, even
when power is not present.
The plastic box is provided with tamper protection (against unauthorized openings) and optional anti-tearing protection. The box can house a 12
V - 1.2 Ah battery
30
INTRODUCTION
GENERAL FEA GENERAL FEATURES GENERAL FEA
GENERAL FEA GENERAL FEA
DESCRIPTION DESCRIPTION DESCRIPTION DESCRIPTION DESCRIPTION
TURES TURES TURES
TURES
B-TEL2