Bentel Security B-TEL2 Manual De Instalación Y Usuario página 39

Confirm call result
Enable/disable voice call confirmation by entering the following formula:
?  @      C
?  @      C
If voice call confirmation is disabled, message playback will begin after the Start playing after 'Delay' time
has elapsed (see the following paragraph). When voice call confirmation is instead enabled, message
playback will begin after a voice response is received from the remote user.
If this option is enabled (value 1), the remote user will send confirmation by pressing the
telephone keypad (valid only for touch tone telephones).
Start playing after 'Delay'
Program the delay after which the dialer begins voice message playback by entering the following formula:
where <Delay> is a number between 0 and 240 seconds (factory set at 0, no delay).
Start playing after 'Voice on-line'
Enable/disable voice call confirmation by entering the following formula:
?  @      C
?  @      C
Start playing after 'Selection'
Set on to "0" the two previous options to play the message immediately after the end of the selection, as
indicated below:
?     @      C

  @      C 
?  
One way audio
Select the listen-in mode by entering the following formula:
?  @      C
?  @      C
4 Channel telephone dialler
(to disable voice call confirmation - factory setting)
(to enable voice call confirmation)
?  @
<Delay>
(to disable voice call confirmation)
(to enable voice call confirmation - factory setting)
(Start playing after 'Delay' = 0 secs.)
(Disable the playing after 'Voice on Line')
(to disable listen-in mode – factory setting)
(to enable listen-in mode)
C
G
key of the remote
39