Sandri Garden SG 925/30 CS Manual De Instrucciones página 35

PETROL CHAIN SAW FOR TREE SERVICE USER MANUAL
9) Continue to pull the starter cord until the engine
starts.
1
CAUTION-HAZARD! The cutting chain
moves because the throttle trigger
is partially advanced.
- Hold the chainsaw firm (Fig.34) letting the
engine and chain run for at least 15 seconds
(for pre-heating).
10) Using the palm of your hand, press the throttle
trigger lock-out (fig. 36 part. 1) and then press
the throttle trigger (fig. 36 part 2); this way "THE
THROTTLE ADVANCEMENT" will disengage
and the engine will run at minimum speed.
1
2
11) Do not use the chainsaw if the chain
moves at the minimum engine setting.
Instead, apply to a service centre for assistance.
Fig.35
12) Do not move or transport the
chainsaw with the engine running. Dur-
ing transport, cover the bar with the protector
provided.
1) To stop the engine, lower the switch lever to
the "0
STOP
2) After using the chain saw for long periods of
time, it is advisable to let the engine run at idle
speed or several seconds before operating the
"0 " switch lever.
STOP
Fig.27
Fig.36
WARNING! Familiarise yourself with
the operation of the stop switch lever
in order to act promptly in emergencies.
WARNING! The chain will continue to
move for some time after the throttle
lever is released.
STOPPING THE ENGINE
" position (Fig.27).
35