Tabla de contenido
Idiomas disponibles
Idiomas disponibles
PROGRAM YOUR HEATING PERIOD: USE THE CENTRALISED
Before setting the programming, the time must be set on the radiator or you must make sure that it is already
at the correct day and time.
Corresponds to the use of a centralised programmer.
NB : In case there is no command on the pilot wire, the radiator operates in Comfort mode.
When changing from the Comfort mode to the ECO mode, the changing time is about 12 seconds.
The Frost Free and Shedding commands take priority compared to the Eco and Comfort modes.
To
activate
Centralised
programming,
press
times on
until the cursor is
on the Centralised programming
mode
.
AUTOMATIC VENTILATION DETECTION FUNCTION
To use this function, we recommend you to set your radiator on modes
This function is a supplement to the programming.
The automatic ventilation detection function
device will automatically change to Frost Free
set temperature, when it detects that it is closed.
We do not recommend the use of an automatic ventilation detection function
located next to an entry door giving onto the outside or onto the garage.
Your radiator reacts to opening and closing of windows, in accordance
with several variables, including in particular:
- the desired temperature in the room,
- external temperature,
- configuration of your installation (the location of your radiator in relation
to the window).
By detecting the opening and closing of the window, the Ventilation
function enables you to adopt a natural eco-citizen position: not to heat
your dwelling needlessly when you are ventilating it, for more comfort
and economy.
34
PROGRAMMING MODE
How to activate centralised programming?
several
will detect the opening and the closing of the windows. The
(7°C) when it detects an open window and will restart at the
The
centralised
programming
picto and the current setting is
displayed on the screen.
,
or
.
in corridors and rooms
The optimum location area
Capítulos
Tabla de contenido
