Additional Filtering Capabilities; Enhanced Id Processing; Enhanced Transaction Recording; Checkweighing - Mettler Toledo IND9D57 Manual De Instrucciones

•
1.4.1.2.

Additional filtering capabilities

•
•
•
1.4.1.3.

Enhanced ID processing

•
•
1.4.1.4.

Enhanced Transaction Recording

•
•
1.4.1.5.

Checkweighing

•
•
1.4.2.

IND570 Features Unavailable or Changed in Dyn-570

1.4.2.1. Scale > Capacity & Increment
1.4.2.2.

Tare functions changed

The tare table, keyboard and pushbutton tare are not available while the Dyn application is running.
However, a tare may be entered on the keypad, or a pushbutton tare performed, from the home
screen while the Dyn-570 application is not running. If a tare is set, Dyn-570 will use that tare for
all transactions until the application is stopped and the tare cleared. When operating with a tare, the
Net symbol "N" will be displayed above the weight unit on the terminal display.
Auto-tare cannot be used in Dyn mode.
1-4 METTLER TOLEDO IND9D57/Dyn-570 Dynamic Weighing System Installation Manual
Available buffering and deferred transmission of weighment data, triggered by down-stream
photo-eye
Tunable notch filter –eliminates natural resonances from conveyor equipment
AutoTune feature – calculates weighing filtering parameters based on worst-case package
sample
Dynamic Adjust feature – compensates for high-speed conveyor operation. Calculates offsets
based on sample weighments of the longest and shortest package sizes
Two independent input sources to store barcode and dimensional data with the transaction
record
IDs can be added to the printed or stored transaction record
100,000-record transaction table, including package data captured during weighment
Easy export via FTP for off-line analysis and archiving
500 stored targets
Adjustable reject output delay and duration timer for each target ID
Note that multiple range and multi-interval operation are not supported in Dyn-570.
30416342 | 02 | 12/2018