Service And Maintenance; Cleaning And Maintenance; Service - Mettler IND231 Manual De Instrucciones

3

Service and Maintenance

IND231/IND236 terminal is designed to provide years of dependable operation. However, METTLER
TOLEDO recommends that – as with any industrial measurement equipment – the terminal and the
connected scale system be serviced periodically. Timely, factory-specified maintenance and
calibration by a METTLER TOLEDO authorized service technician will ensure and document accurate
and dependable performance to specifications.
3.1.

Cleaning and Maintenance

Clean the terminal's keypad and cover with a clean, soft cloth that has been dampened with a mild
glass cleaner. Do not use any type of industrial solvent such as toluene or isopropanol (IPA) that
could damage the terminal's finish. Do not spray cleaner directly on the terminal.
Regular maintenance inspections and calibration by a qualified service technician are
recommended. The IND231/IND236 terminal is a rugged instrument; however, the front panel is a
relatively thin covering over sensitive electronic switches and a lighted display. Care should be
taken to avoid any punctures to this surface or any vibrations or shocks to the instrument. If the
front panel is punctured, ensure that steps are taken to prevent dust and moisture from entering the
unit until the terminal can be repaired.
3.2.

Service

Only qualified personnel should perform installation, programming, and service. Please contact a
local authorized METTLER TOLEDO representative for assistance.
METTLER TOLEDO recommends periodic preventative maintenance to the terminal and scale system
to ensure reliability and to maximize service life. All measurement systems should be periodically
calibrated and certified as required to meet production, industry and regulatory requirements. We
can help you maintain uptime, compliance and quality system documentation with periodic
maintenance and calibration services. Contact your local METTLER TOLEDO authorized service
organization to discuss your requirements.
30100541 | 00 | 08/2013
ONLY PERMIT QUALIFIED PERSONNEL TO SERVICE THE TERMINAL. EXERCISE CARE WHEN
MAKING CHECKS, TESTS AND ADJUSTMENTS THAT MUST BE MADE WITH POWER ON. FAILING
TO OBSERVE THESE PRECAUTIONS CAN RESULT IN BODILY HARM AND/OR PROPERTY DAMAGE.
WARNING
METTLER TOLEDO IND231/IND236 Quick Guide 3-1